What is the easiest way to pick a Master Lock?

Let's say you've lost the keys to your Master Lock, and nobody in town will sell you a blowtorch since that one "misunderstanding" a few years back.

So, what is the next easiest way to pick a Master Lock?The easiest way to pick a Master Lock is by raking it. This is done by first tensioning the core and using a lock pick to bump all of the pins to the shear line. Master Locks can also be picked with a variety of makeshift tools including paperclips, bobby pins, soda cans, and even chicken bones.

The Mechanism of Action of the Lock
To open a lock, you need to know its operating principle. Each master lock will be made up of three major parts: a set of pins, springs above, and a spindle where we insert the key. You can see that there are serrations on each key, each of those will fit into a pin. So, the more pins a lock has inside, the higher its security. These pins have different heights, that’s why each key has a different shape.

How To Pick A Padlock Step by Step
The first major feat is garnering the correct tools for the job. You basically need only two tools, but three is always a help especially with stubborn locks. The two basic tools that you need like with all traditional lock picking is the tension wrench and the pick. These can be purchased, or fashioned out of bobby pins, paper clips or many other house hold items. If you are just starting out, I would recommend getting a clear trainer padlock before moving on to learn how to pick a master lock.

How to pick a master lock when your key gets lost.
Step 1:Straighten the paper clip and then bend the tip down so it is angled a little bit less than 45 degrees.
Step 2:Use a pen to make a tension wrench. Break off the metal clip from the pen cap and bend the tip slightly.
Step 3:Turn the lock so that the large end of the key insert is on the top. As you cradle the lock in your left hand, insert the bent end of the tension wrench into the large end of the key insert and lift up on it slightly with the thumb of your left.
Step 4:Insert the bent end of the paper clip just under the tension wrench as far as it will go. Exert a little pressure on the tension wrench as you wiggle the paper clip up and down. You may need to twist the paper clip simultaneously as you wiggle it.

Lockpickmall.com carries many beginner lock pick sets.Finally, we'll finish off this guide with a brief look into the main characteristics you should consider when buying lock picks to help ensure you get what you need.


whitneyllu whitneyllu

1 Blog posts

 Comments