In the normal working process, the cylinder shall be replaced at the first time once the bolt is loose or the lining plate is falling off. If the treatment measures are not timely, the cylinder will crack. After cracks occur, measures shall be taken to ensure that the cylinder position is correct and the next step of work will be started.

After the welding process is completed, the root of the weld should be cleaned in the vertical roller mill, and the welding should be carried out at the same time. The specific welding times are about three times. During the welding process, the welding seam needs to be knocked, and the number of strikes is more than four times, so that the stress can be effectively eliminated and the welding work is good.

The operation of vertical roller mill is affected by external factors, and various faults will occur. The causes of the failure will be analyzed, and then proper and reasonable technical measures shall be taken to ensure the normal performance of the vertical roller mill and ensure the smooth production. What problems have you encountered in your device operation? Welcome to communicate with others.